phone (503) 612-9860 fax (503) 692-3518 oersted@oersted.com
	HOME : PRODUCTS : FLUXMETER 480
	Model 480 Fluxmeter
		Features
		Measures DC or AC magnetic fields (up to 50kHz) Peak mode allows fast magnetizing pulses to be captured Automatic and manual drift-compensation modes Storage of setup parameters for up to 10 coils High-visibility vacuum-fluorescent display is easily read at a distance Analog voltage outputs, 3 user-configurable output relays, RS232C port, and IEEE-488 port
show enlarged front and back panels
		Related equipment: Helmholtz Coils
Price: $ 2,772 PRICES SUBJECT TO CHANGE WITHOUT NOTICE Description The Model 480 is a laboratory grade fluxmeter, for use with a Helmholtz coil or custom search coils. This instrument measures the total flux of a magnet part, which can be related to the magnetic field strength. Applications include magnet testing, magnetizing, and automated field measurement. In order to provide accurate and repeatable measurements, automatic or manual drift compensation is available to the user. A peak mode allows even the fastest magnetic pulse, such as those from a magnetizer, to be accurately measured. The Model 480 is also useful for measuring AC fields that are too high in frequency for a gaussmeter to detect. Relay outputs and an external reset input allow for simple automation functions to be implemented, while the RS232C and IEEE-488 ports permit advanced control of the fluxmeter via a remote computer or automation equipment. General Specifications Input Type Two lead (double-banana plug), ground referenced Input Resistance 100kOhm or 10kOhm Resolution 0.0005mVs (dependent on search coil type) Accuracy, DC (displayed) ± 0.25% of reading Accuracy, AC (displayed) ± 1% of reading (10 Hz - 10 kHz) Frequency Range 2 Hz - 50 kHz Update Rate 5 readings / sec (display); up to 30 readings / sec on ports Display Resolution ± 5 3/4 digits (varies with measurement mode) Measurement Modes DC, DC Peak, AC, AC Peak Measurement Features Peak hold, automatic drift compensation, storage of setup parameters Measurement Units V-s, MxN, WbN, VsPhi, MxPhi, Gauss, Tesla, Wb-cm Front Panel Display Vacuum-Flourescent, high-visibiliy blue, 2 lines x 20 characters Communication Ports RS232C (9600 Baud) / IEEE-488 (complies with IEEE-488.2) Alarms (3) Settings High/low set point, inside/outside, audible Actuators Display annunciator, beeper, relays Temperature Range 15 - 35° C (operating temp; 5 - 40° with reduced accuracy) Input Power 100, 120, 220, 240 VAC 50/60Hz (select voltage when ordering) Analog Outputs Analog Output 1 (monitor output) Configuration Real-time analog output voltage Output Voltage ± 3V = ± FS on selected range Accuracy Dependent on search coil used Frequency Response DC to 10 kHz Analog Output 2 (corrected output) Configuration Output voltage from DAC Output Voltage ± 10V (Model 480-10: ± 10V) Accuracy ± 2.5 mV Connector Detachable terminal block Physical Net Weight 6.6 lbs (3 kg) Size (W x H x D) 8.5" x 3.5" x 12.5" (217mm x 90mm x 317mm; half-rack package) Package Contents Fluxmeter, manual, terminal-block mating connector, line cord Software Labview driver (available for download)
[home] [products] [services] [articles] [catalog] [request quote] [links] [email]
Copyright © 2003 Oersted Technology II Inc.